| MRC |
Requirement Statement |
Characteristics |
| CPRJ |
TRIP RELEASE METHOD |
MAGNETIC ALL LOCATIONS |
| AAQL |
BODY STYLE |
MULTIPOLE-MULTIPLE ACTUATOR TYPE |
| ADAQ |
BODY LENGTH |
2.510 INCHES MAXIMUM |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
2.553 INCHES MAXIMUM |
| CPRY |
EXTERNAL ACTUATOR LINKAGE ARRANGEMENT |
ONE, TWO, AND THREE LINKED |
| APNQ |
III ARC QUENCHING METHOD |
MAGNETIC BLOWOUT |
| CPRW |
ACTUATOR FUNCTION |
TRIP-RESET |
| CPRF |
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS |
240.0 AC ALL LOCATIONS |
| CPRL |
TRIP RELEASE CHARACTERISTIC |
TIME DELAY ALL LOCATIONS |
| AEBQ |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH |
0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| CPRQ |
RESET METHOD |
MANUAL |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
1.660 INCHES MINIMUM AND 1.960 INCHES MAXIMUM |
| CQXF |
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED |
FUNGUS RESISTANT AND MOISTURE RESISTANT |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
2.046 INCHES MINIMUM AND 2.078 INCHES MAXIMUM |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 THREADED STUD |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
6 THREADED HOLE |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-PRF-55629/5 GOVERNMENT SPECIFICATION |
| CPLM |
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE |
15.0 AMPERES AC ALL LOCATIONS |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| ADTV |
CASE MATERIAL |
PLASTIC |
| CPRR |
MAIN CONTACT TRIPPING MECHANISM TYPE |
TRIP FREE |
| FREQ |
FREQUENCY IN HERTZ |
60.0 ALL LOCATIONS |
| AJEC |
BOSS HEIGHT |
0.109 INCHES MINIMUM AND 0.171 INCHES MAXIMUM |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MIL-PRF-55629/5 |
| CPRT |
MANUAL ACTUATOR TYPE AND QUANTITY |
3 TOGGLE |
| CPRG |
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS |
1000.0 AC ALL LOCATIONS |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| BBRG |
III STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| CQJX |
NOMINAL THREAD SIZE |
0.138 INCHES |
| CQWN |
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT |
2.200 MINIMUM AT 200 PCT AND 20.000 MAXIMUM AT 200 PCT ALL LOCATIONS |
| CPRN |
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT |
115.0 ALL LOCATIONS |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
M55629/5-094 |
| AKPX |
POLE QUANTITY |
3 |
| CPSM |
INTERNAL TRIP RELEASE CONFIGURATION |
SERIES TRIP ALL LOCATIONS |
| CPRH |
CIRCUIT PROTECTION TYPE |
OVERCURRENT ALL LOCATIONS |
| ADAT |
BODY WIDTH |
2.156 INCHES MINIMUM AND 2.344 INCHES MAXIMUM |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| CPRX |
ACTUATOR POSITION DESIGNATION |
AT EACH POLE |
| AAJE |
THREAD PITCH DIAMETERS |
0.1177 TO 0.1214 INCHES |
