| MRC |
Requirement Statement |
Characteristics |
| CXCG |
INCLUDED CONTACT QUANTITY |
14 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRN |
POLARIZATION METHOD |
JACKSCREW |
| CSCF |
TERMINAL TYPE |
SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
3.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| ABMK |
OVERALL WIDTH |
0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
48 |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQW |
MATING END QUANTITY |
1 |
| CSWM |
SHELL SURFACE TREATMENT |
ANODIZE |
| PRMT |
III PRECIOUS MATERIAL |
GOLD |
| AAJD |
THREAD CLASS |
2A AND 2B |
| AFRW |
CONNECTOR CABLE STRAIN RELIEF METHOD |
CABLE CLAMP |
| CQJX |
NOMINAL THREAD SIZE |
0.099 INCHES |
| ABHP |
OVERALL LENGTH |
0.875 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| CTTL |
(NON-CORE DATA) JACKSCREW TYPE AND LOCATION |
MALE LEFT-HAND AND FEMALE RIGHT-HAND |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
14 SINGLE MATING END |
| AFQR |
THREADED DEVICE TYPE |
COUPLING FACILITY |
| ABKW |
OVERALL HEIGHT |
1.667 INCHES MINIMUM AND 1.677 INCHES MAXIMUM |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
400.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| PMWT |
III PRECIOUS MATERIAL AND WEIGHT |
0.014 GOLD GRAINS, TROY |
| AFRV |
CONNECTOR LOCKING METHOD |
JACKSCREW-SOCKET |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQZG |
INSERT MATERIAL |
PLASTIC DIALLYL PHTHALATE GLASS FILLED SINGLE MATING END |
| AWTN |
III OPERATING TEMP RATING |
150.0 DEG CELSIUS MAXIMUM |
| AFRT |
SHELL TYPE |
HOOD, TOP OPENING |
| AAQL |
BODY STYLE |
HOOD, TOP OPENING W/CLAMP |
| AKMG |
NOMINAL THREAD LENGTH |
0.125 INCHES |
| CTKL |
INSERT MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-M-19833, TYPE GDI-30 OR TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-M-14, TYPE SDG-F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| PMLC |
III PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD |
| AFQJ |
CABLE ENTRANCE DIAMETER |
0.160 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
