| MRC |
Requirement Statement |
Characteristics |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END 37.0 DEGREES 2ND END |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
NIPPLE STEEL, QQ-S-763, CLASS 304, COND A NUT ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024, T6 |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS8005K334M080 |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
NIPPLE PASSIVATED NUT ANODIZED, MIL-A-8625 |
| ADJS |
EXTERIOR COLOR |
NATURAL |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END THREADED INTERNAL TUBE 2ND END |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJD |
THREAD CLASS |
3B 1ST END 3B 2ND END |
| CQBD |
BURST TEST PRESSURE |
5000.0 POUNDS PER SQUARE INCH |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END ELBOW 2ND END |
| ABJH |
TEMP RATING |
-67.0 DEG FAHRENHEIT AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END SWIVEL NUT FLARE 2ND END |
| ABKV |
OUTSIDE DIAMETER |
0.789 INCHES NOMINAL |
| AARX |
INSIDE DIAMETER |
0.625 INCHES NOMINAL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS8005 GOVERNMENT STANDARD |
| CQJX |
NOMINAL THREAD SIZE |
1.062 INCHES 1ST END 1.062 INCHES 2ND END |
| ZZZW |
(NON-CORE DATA) DEPARTURE FROM CITED DOCUMENT |
AS MODIFIED BY EXTERNAL SUPPORT |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
6.500 INCHES |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| CRSM |
VACUUM IN TORR |
254.0 |
| THSD |
THREAD SERIES DESIGNATOR |
UN 1ST END UN 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END 12 2ND END |
| SUPP |
SUPPLEMENTARY FEATURES |
THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE, 96906, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CRLL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
NIPPLE PASSIVATED NUT ANODIZED, MIL-A-8625 |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT AND FUEL RESISTANT AND OIL RESISTANT |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
80.0 |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 1ST END 90.0 DEGREES 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
NIPPLE STEEL, QQ-S-763, CLASS 304, COND A NUT ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024, T6 |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1000.0 POUNDS PER SQUARE INCH |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJP |
(NON-CORE DATA) OUTSIDE SURFACE TREATMENT |
PASSIVATED |
| CRXX |
MEASURING METHOD AND LENGTH |
33.500 INCHES NOMINAL WORKING |
