| MRC |
Requirement Statement |
Characteristics |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL |
STYLE DESIGNATOR |
SINGLE ROW, CONCAVE ROLLERS |
| ADGA |
OVERALL OUTSIDE DIAMETER |
0.8000 INCHES NOMINAL |
| CTLK |
SELF-ALIGNMENT ANGLE |
10.00 DEGREES NOMINAL |
| AGVT |
OUTER RING WIDTH |
0.3500 INCHES NOMINAL |
| AGVU |
INNER RING WIDTH |
0.5930 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP E52100 INNER RING STEEL COMP 4620 ROD END BODY STEEL COMP E52100 ROLLER RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL STEEL COMP 430 SHIELD STEEL SNAP RING |
| AGGY |
SHANK THREAD LENGTH |
0.8120 INCHES NOMINAL |
| ADZG |
LUBRICATION MATERIAL |
GREASE |
| AGZA |
ALIGNMENT TYPE |
SELF-ALIGNING |
| LMDC |
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| SFTT |
SURFACE TREATMENT |
CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES |
| ABHP |
OVERALL LENGTH |
1.9930 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AAZF |
SHANK STYLE |
EXTERNALLY THREADED |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| FEAT |
SPECIAL FEATURES |
0.0670 IN. W BY 0.0490 IN. DEEP BY 0.6900 IN. LG KEYWAY IN SHANK,NAS516-1 GREASE FITTING,ACCEPTS NAS513-4 LOCKWASHER |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
| AGXH |
LENGTH FROM BORE CENTER TO SHANK END |
1.6080 INCHES NOMINAL |
| AGYK |
SHIELD QUANTITY |
2 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING MIL-S-7493 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SHIELD |
| AAZE |
SHANK DIAMETER |
0.2500 INCHES NOMINAL |
| ABXV |
BORE DIAMETER |
0.2500 INCHES NOMINAL |
| AHAW |
SELF-ALIGNMENT LOCATION |
INTERNAL |
| AGYW |
BEARING SEAL TYPE |
CONTACT |
| AGYJ |
SEAL QUANTITY |
2 |
