| MRC |
Requirement Statement |
Characteristics |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.875 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL TT-C-595 FED SPEC 1ST TREATMENT RESPONSE AND TT-E-529 FED SPEC 2ND TREATMENT RESPONSE HEAD TT-C-595 FED SPEC 1ST TREATMENT RESPONSE AND TT-E-529 FED SPEC 2ND TREATMENT RESPONSE GRIP |
| AAWK |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER |
0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
2A |
| SR-5 |
MANUFACTURERS CODE |
80063 |
| SR-5 |
DESIGN CONTROL REFERENCE |
SCB93177 |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| AASB |
FASTENER LENGTH |
1.904 INCHES MINIMUM AND 1.908 INCHES MAXIMUM |
| AAWL |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER |
0.372 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| SR-5 |
THE MANUFACTURERS DATA |
|
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AAWE |
THIRD DIAMETER FROM HEAD |
0.938 INCHES NOMINAL |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.062 INCHES NOMINAL |
| AAWD |
SECOND DIAMETER FROM HEAD |
0.839 INCHES MINIMUM AND 0.849 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
HEXAGON |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL PAINT AND ENAMEL HEAD PAINT AND ENAMEL GRIP |
| AASA |
THREAD LENGTH |
0.438 INCHES MINIMUM |
| AATB |
WIDTH BETWEEN FLATS |
0.938 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| AAWJ |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER |
0.122 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| AAWM |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIFTH DIAMETER |
1.342 INCHES MINIMUM AND 1.346 INCHES MAXIMUM |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
5 |
| AASU |
HEAD HEIGHT |
0.565 INCHES NOMINAL |
| AAWF |
FOURTH DIAMETER FROM HEAD |
0.016 INCHES NOMINAL |
| AAWG |
FIFTH DIAMETER FROM HEAD |
0.499 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
THREAD RELIEF 0.062 IN. WIDTH BY 0.047 IN. DEPTH AND ENAMEL COLOR NO. 2430 OVER OLIVE DRAB PAINT |
| MATT |
MATERIAL |
STEEL COMP 303SE OVERALL |
