| MRC |
Requirement Statement |
Characteristics |
| CQSZ |
INCLOSURE CONFIGURATION |
CAN |
| CTFT |
CASE OUTLINE SOURCE AND DESIGNATOR |
T0-99 JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| CQZP |
INPUT CIRCUIT PATTERN |
4 INPUT |
| ADAR |
BODY OUTSIDE DIAMETER |
0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| PRMT |
III PRECIOUS MATERIAL |
GOLD |
| PMLC |
III PRECIOUS MATERIAL AND LOCATION |
TERMINALS GOLD |
| TTQY |
TERMINAL TYPE AND QUANTITY |
8 PIN |
| CSSL |
DESIGN FUNCTION AND QUANTITY |
1 FLIP-FLOP, CLOCKED AND 1 FLIP-FLOP, D-TYPE |
| AFGA |
OPERATING TEMP RANGE |
-55.0 TO 125.0 DEG CELSIUS |
| CQWX |
OUTPUT LOGIC FORM |
RESISTOR-TRANSISTOR LOGIC |
| CBBL |
FEATURES PROVIDED |
HERMETICALLY SEALED AND MONOLITHIC AND NEGATIVE OUTPUTS AND POSITIVE OUTPUTS AND MEDIUM POWER AND MEDIUM SPEED AND W/CLEAR AND EDGE TRIGGERED |
| AFJQ |
STORAGE TEMP RANGE |
-65.0 TO 150.0 DEG CELSIUS |
| CWSG |
TERMINAL SURFACE TREATMENT |
GOLD |
| CZEN |
VOLTAGE RATING AND TYPE PER CHARACTERISTIC |
4.0 VOLTS MAXIMUM POWER SOURCE |
| ADAU |
BODY HEIGHT |
0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| TEST |
TEST DATA DOCUMENT |
13499-351-7206 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CQSJ |
INCLOSURE MATERIAL |
GLASS AND METAL |
| AEHX |
MAXIMUM POWER DISSIPATION RATING |
250.0 MILLIWATTS |
