| MRC |
Requirement Statement |
Characteristics |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
8.500 INPUT TO OUTPUT NOMINAL |
| AJSL |
BODY SIZE |
8 |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| AJTS |
ROTOR DC RESISTANCE IN OHMS |
37.00 NOMINAL |
| AJSY |
ZSO RESISTANCE IN OHMS |
12.00 NOMINAL |
| AAFZ |
BODY MATERIAL |
STEEL, STAINLESS |
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
26.0 NOMINAL |
| AJWQ |
PILOT LENGTH |
0.0430 INCHES NOMINAL |
| AJST |
ROTOR INPUT CURRENT RATING |
100.0 MILLIAMPERES NOMINAL |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-7.0 TO 7.0 |
| CRSJ |
SHAFT TYPE |
ROUND, FLATTED SINGLE SHAFT |
| ABPA |
UNDERCUT DIAMETER |
0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| AAVL |
PILOT DIAMETER |
0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
30.00 OUTPUT |
| CWFM |
SHAFT FLATTED PORTION LENGTH |
0.0850 INCHES MINIMUM AND 0.0950 INCHES MAXIMUM SINGLE SHAFT |
| ABKK |
FLANGE DIAMETER |
0.7400 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| CQXQ |
PLUS J ZRO REACTANCE IN OHMS |
1260.00 NOMINAL |
| AJSW |
ZRO RESISTANCE IN OHMS |
54.00 NOMINAL |
| AJTT |
STATOR DC RESISTANCE IN OHMS |
10.40 NOMINAL |
| CTJK |
SHAFT FLATTED PORTION THICKNESS |
0.0130 INCHES MINIMUM AND 0.0170 INCHES MAXIMUM SINGLE SHAFT |
| ABHP |
OVERALL LENGTH |
1.4310 INCHES MINIMUM AND 1.4710 INCHES MAXIMUM |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
540.0 MILLIWATTS NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 TAB, SOLDER LUG |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.2900 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.1410 INCHES MINIMUM AND 0.1710 INCHES MAXIMUM SINGLE SHAFT |
| ABKU |
FLANGE THICKNESS |
0.0620 INCHES NOMINAL |
| AAQL |
BODY STYLE |
STANDARD ROUND A |
| CRGZ |
PLUS J ZSO REACTANCE IN OHMS |
140.00 NOMINAL |
