| MRC |
Requirement Statement |
Characteristics |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END 37.0 DEGREES 2ND END |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 CLASS |
| FEAT |
SPECIAL FEATURES |
WEAPON SYSTEM ESSENTIAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJ 1ST END UNJ 2ND END |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END THREADED INTERNAL TUBE 2ND END |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJD |
THREAD CLASS |
3B 1ST END 3B 2ND END |
| CQBD |
BURST TEST PRESSURE |
5000.0 POUNDS PER SQUARE INCH |
| SR-1 |
MFR SOURCE CONTROLLING REFERENCE |
J242G0104CA |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END SWIVEL NUT FLARE 2ND END |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
NIPPLE ALUMINUM ALLOY NUT ALUMINUM ALLOY SOCKET STEEL, CORROSION RESISTING |
| SR-1 |
MANUFACTURERS CODE |
07482 |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
FEAT |
| CQJX |
NOMINAL THREAD SIZE |
1.062 INCHES 1ST END 1.062 INCHES 2ND END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
6.500 INCHES |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| CRSM |
VACUUM IN TORR |
254.0 |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END ELBOW 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END 12 2ND END |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CRLL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
NIPPLE ANODIZED, MIL-A-8625 NUT ANODIZED, MIL-A-8625 SOCKET PASSIVATED, MIL-F-27272 |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
NIPPLE ALUMINUM ALLOY NUT ALUMINUM ALLOY SOCKET STEEL, CORROSION RESISTING |
| CRDW |
HYDROSTATIC TEST PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
NIPPLE ANODIZED, MIL-A-8625 NUT ANODIZED, MIL-A-8625 SOCKET PASSIVATED, MIL-F-27272 |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ABJH |
TEMP RATING |
-67.0 DEG FAHRENHEIT AND 275.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AARX |
INSIDE DIAMETER |
0.615 INCHES MINIMUM AND 0.645 INCHES MAXIMUM |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1000.0 POUNDS PER SQUARE INCH |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJP |
(NON-CORE DATA) OUTSIDE SURFACE TREATMENT |
PASSIVATED |
| CRXX |
MEASURING METHOD AND LENGTH |
10.500 INCHES NOMINAL WORKING |
