| MRC |
Requirement Statement |
Characteristics |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
2.297 INCHES MINIMUM AND 2.359 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| AECS |
BOLT HOLE QUANTITY |
4 |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
2.500 INCHES MINIMUM AND 2.506 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR W/BOLT HOLES |
| ADVD |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH |
0.404 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CHROMATE AND CADMIUM |
| ABHP |
OVERALL LENGTH |
3.313 INCHES MINIMUM AND 3.375 INCHES MAXIMUM |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.521 INCHES MINIMUM AND 0.557 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE |
| AAUB |
HOLE DIAMETER |
0.144 INCHES NOMINAL |
