| MRC |
Requirement Statement |
Characteristics |
| AKMG |
NOMINAL THREAD LENGTH |
0.110 INCHES |
| AFRN |
POLARIZATION METHOD |
JACKSCREW |
| CSCF |
TERMINAL TYPE |
SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| CSGF |
CONTACT MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| TEST |
TEST DATA DOCUMENT |
06481-903136 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| ABMK |
OVERALL WIDTH |
0.530 INCHES MINIMUM AND 0.590 INCHES MAXIMUM |
| AFQW |
MATING END QUANTITY |
1 |
| PRMT |
III PRECIOUS MATERIAL |
GOLD |
| CQZG |
INSERT MATERIAL |
PLASTIC DIALLYL PHTHALATE SINGLE MATING END |
| AAJD |
THREAD CLASS |
2A AND 2B |
| AFRW |
CONNECTOR CABLE STRAIN RELIEF METHOD |
CABLE CLAMP |
| AFQR |
THREADED DEVICE TYPE |
COUPLING FACILITY |
| CQJX |
NOMINAL THREAD SIZE |
0.086 INCHES |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
34 SINGLE MATING END |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AFRV |
CONNECTOR LOCKING METHOD |
JACKSCREW-SOCKET |
| ZZZK |
SPECIFICATION/STANDARD DATA |
06481-903136/7 MANUFACTURERS SPECIFICATION |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AFQZ |
CONTACT REMOVABILITY |
REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| ABKW |
OVERALL HEIGHT |
2.120 INCHES NOMINAL |
| AFRT |
SHELL TYPE |
HOOD, TOP OPENING |
| AAQL |
BODY STYLE |
HOOD, TOP OPENING W/CLAMP |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
7.5 SINGLE MATING END SINGLE CONTACT GROUPING |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING |
| ABHP |
OVERALL LENGTH |
1.530 INCHES MINIMUM AND 1.590 INCHES MAXIMUM |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCG |
INCLUDED CONTACT QUANTITY |
34 SINGLE MATING END SINGLE CONTACT GROUPING |
| PMLC |
III PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACE GOLD |
| AFQJ |
CABLE ENTRANCE DIAMETER |
0.310 INCHES MINIMUM AND 0.590 INCHES MAXIMUM |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-G-45204 TYPE 2,CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE AND QQ-N-290,CLASS 2 FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
