| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| HL552-5-10 | PAUL R. BRILES INC. | 27624 | 5 | 9 | 2 | ||||
| HL552-5-10 | SPS TECHNOLOGIES LLC | 56878 | 5 | 9 | 2 | ||||
| HL552-5-10 | SPS TECHNOLOGIES LLC | 80539 | 5 | 9 | 2 | ||||
| HL552-5-10 | ALCOA GLOBAL FASTENERS INC. | 92215 | 5 | 9 | 2 | ||||
| HL552-5-10 | HUCK INTL INC | 97928 | 5 | 9 | 2 | ||||
| HL552-5-10 | HUCK INTERNATIONAL INC. | 17446 | 5 | 2 | 2 | ||||
| PSY2E20N | REXNORD INDUSTRIES INC | 19382 | 3 | 2 | 2 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| ANKF | SEAL LOCATION | BOTH ENDS |
| AKRF | SEAL TYPE | CONTACT |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK, SOLID |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| AFWE | HOUSING WIDTH | 6.3125 INCHES NOMINAL |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AFWC | HOUSING HEIGHT | 3.3125 INCHES NOMINAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| AMCL | BLOCK TYPE | FIXED |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANJS | SHAFT END TYPE | OPEN |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| ABXV | BORE DIAMETER | 1.2500 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 4.7500 INCHES NOMINAL |
| ABTD | MOUNTING SLOT WIDTH | 0.5000 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 0.3125 INCHES NOMINAL |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| ABVG | MOUNTING SLOT LENGTH | 0.7656 INCHES NOMINAL |
| ANKH | COLLAR LOCATION | ONE END |
| AGNF | BASE LENGTH | 1.4375 INCHES NOMINAL |
| MATT | MATERIAL | STEEL BEARING SURFACE STEEL HOUSING RUBBER SEAL |
| AHZC | ASSEMBLY OVERALL LENGTH | 1.9062 INCHES NOMINAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 1.6875 INCHES NOMINAL |
