| MRC |
Requirement Statement |
Characteristics |
| ADPW |
OUTSIDE CORNER RADIUS |
0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM |
| MATT |
MATERIAL |
RUBBER CHLOROPRENE CLASS CR OVERALL |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
0.584 INCHES MINIMUM AND 0.604 INCHES MAXIMUM |
| ABVL |
APERTURE DIAMETER |
0.500 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
0.875 INCHES MINIMUM AND 0.891 INCHES MAXIMUM |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
0.584 INCHES MINIMUM AND 0.604 INCHES MAXIMUM |
| AECS |
BOLT HOLE QUANTITY |
4 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
SOLID SINGLE OR COMPOSITION |
| ABHP |
OVERALL LENGTH |
0.875 INCHES MINIMUM AND 0.891 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| ADVD |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH |
0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM D2000 2BC515ABC1F2Z1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAUB |
HOLE DIAMETER |
0.162 INCHES MINIMUM AND 0.182 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR |
| ADVM |
CROSS-SECTIONAL THICKNESS |
0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |
