| MRC |
Requirement Statement |
Characteristics |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
1000000.0 MEGOHM-MICROFARADS |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.156 INCHES NOMINAL |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
100.0 DC SINGLE SECTION |
| ADAT |
BODY WIDTH |
2.875 INCHES NOMINAL |
| CRHD |
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS |
-30.0 TO 30.0 SINGLE SECTION |
| CQLZ |
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS |
-100.0 SINGLE SECTION |
| CWJK |
CASE MATERIAL |
METAL |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
1.500 INCHES NOMINAL |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
10.000 MICROFARADS SINGLE SECTION |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.0500 |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ADAQ |
BODY LENGTH |
3.062 INCHES NOMINAL |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
FEAT |
| FEAT |
SPECIAL FEATURES |
ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE ELECTRONICS SUPPLY CENTER PRODUCTION STANDARD N0. L01760 |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 65.0 DEG CELSIUS MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 TAB, SOLDER LUG |
| CRTP |
TOLERANCE RANGE PER SECTION |
-1.00 TO 1.00 PERCENT SINGLE SECTION |
| CBBL |
FEATURES PROVIDED |
HERMETICALLY SEALED CASE |
| AAQL |
BODY STYLE |
W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
3.750 INCHES NOMINAL |
| ADAU |
BODY HEIGHT |
1.500 INCHES NOMINAL |
| ABJT |
TERMINAL LENGTH |
0.625 INCHES MAXIMUM |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 MOUNTING SLOTS |
