| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
3.798 INCHES MINIMUM AND 3.828 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000,4340 OR E4340 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS6205 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
3.621 INCHES MINIMUM AND 3.641 INCHES MAXIMUM FIRST HOLE |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
| AAJD |
THREAD CLASS |
3A |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| MATT |
MATERIAL |
STEEL OVERALL |
| ANEE |
GRIP LENGTH |
3.365 INCHES MINIMUM AND 3.385 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.438 INCHES NOMINAL |
| AASU |
HEAD HEIGHT |
0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AATB |
WIDTH BETWEEN FLATS |
0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE |
| AAUR |
GRIP DIAMETER |
0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
