| MRC |
Requirement Statement |
Characteristics |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE HEAD CADMIUM AND CHROMATE THREADS |
| ANEE |
GRIP LENGTH |
1.812 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES HEAD QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES THREADS |
| AASU |
HEAD HEIGHT |
0.312 INCHES NOMINAL |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
2.125 INCHES NOMINAL FIRST HOLE |
| AATB |
WIDTH BETWEEN FLATS |
0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
2.296 INCHES MINIMUM AND 2.343 INCHES MAXIMUM |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.141 INCHES NOMINAL FIRST HOLE |
| AAUR |
GRIP DIAMETER |
0.6234 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AHYM |
NOMINAL THREAD DIAMETER |
0.625 INCHES |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| MATT |
MATERIAL |
STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OR STEEL COMP 4037 OVERALL |
| AASK |
HEAD STYLE |
HEXAGON |
| AASA |
THREAD LENGTH |
0.484 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 5TH MATERIAL RESPONSE OR MIL-S-8695 MIL SPEC 6TH MATERIAL RESPONSE OVERALL |
| AAWU |
SINGLE SHEAR STRENGTH |
29150 POUNDS PER SQUARE INCH |
