| MRC |
Requirement Statement |
Characteristics |
| AASA |
THREAD LENGTH |
0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
| AAJD |
THREAD CLASS |
3A |
| ANEE |
GRIP LENGTH |
0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| MATT |
MATERIAL |
STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
HEXAGON |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AATB |
WIDTH BETWEEN FLATS |
0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| AAUR |
GRIP DIAMETER |
0.3266 INCHES MINIMUM AND 0.3276 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS2905 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AASB |
FASTENER LENGTH |
1.016 INCHES MINIMUM AND 1.046 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.156 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8053 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
