| MRC |
Requirement Statement |
Characteristics |
| AASL |
HEAD DIAMETER |
0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNRF |
| MATT |
MATERIAL |
STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| CQFM |
HARDNESS RATING |
80.0 ROCKWELL B MINIMUM OVERALL |
| AAUB |
HOLE DIAMETER |
0.033 INCHES MINIMUM AND 0.039 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
40 |
| ASXK |
HOLE QUANTITY |
2 |
| CRHC |
HOLE CONFIGURATION STYLE |
ROUND INTERNAL HEXAGON |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1351 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CQHQ |
MINIMUM YIELD STRENGTH |
30000 POUNDS PER SQUARE INCH |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| ASDB |
WIDTH ACROSS FLATS |
0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
80000 POUNDS PER SQUARE INCH |
| ABQZ |
INTERNAL DRIVE STYLE |
HEXAGON |
| AAJD |
THREAD CLASS |
3A |
| AASU |
HEAD HEIGHT |
0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD ALL MATERIAL RESPONSES OVERALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AHYM |
NOMINAL THREAD DIAMETER |
0.138 INCHES |
| AASA |
THREAD LENGTH |
0.170 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| BQDM |
HOLE TYPE |
DRILLED |
