| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 181345 | GENERAL MOTORS CORP | 24617 | 5 | 9 | 1 | ||||
| 454888 | GENERAL MOTORS CORP | 24617 | 5 | 9 | 1 | ||||
| 454888 | U S ARMY TANK AUTOMOTIVE COMMAND | 19207 | 5 | 9 | 1 | ||||
| 6477-50 | EASTERN GEAR CORPORATION | 23715 | C | 1 | 1 | C | |||
| B1821BH031F175N | AMERICAN NATIONAL STANDARDS | 80204 | 3 | 2 | 1 | ||||
| MS35304-039 | MILITARY STANDARDS | 96906 | 5 | 9 | 1 | ||||
| MS35304-39 | MILITARY STANDARDS | 96906 | 5 | 9 | 1 | ||||
| MS90727-39 | MILITARY STANDARDS | 96906 | 5 | 9 | 1 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| CSYM | SURFACE FINISH | 63.0 MICROINCHES THREADS |
| AASU | HEAD HEIGHT | 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.874 INCHES MINIMUM AND 1.062 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 2A |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| AASB | FASTENER LENGTH | 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM |
| CBBL | FEATURES PROVIDED | FINISHED HEAD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| MATT | MATERIAL | STEEL OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AATB | WIDTH BETWEEN FLATS | 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | ZINC AND CHROMATE OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | HEXAGON |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| CQBC | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH |
