| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| AAJD |
THREAD CLASS |
2A |
| CYAU |
SCREW MATERIAL |
STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 322 OR STEEL COMP 324 OR STEEL COMP 347 |
| CRSQ |
COUNTERSINK ANGLE |
80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AASU |
HEAD HEIGHT |
0.018 INCHES MINIMUM AND 0.025 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.060 INCHES |
| AASA |
THREAD LENGTH |
0.069 INCHES MINIMUM AND 0.107 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
80000 POUNDS PER SQUARE INCH |
| CMLP |
THREAD QUANTITY PER INCH |
80 |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| SR-1 |
MANUFACTURERS CODE |
81348 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS51960-1B |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
3 TYPE AND 2C STYLE |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK UNDERCUT |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| AASL |
HEAD DIAMETER |
0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
FFS92 |
