| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 0456-275 | LOCKHEED MARTIN CORPORATION | 56232 | 5 | 9 | 1 | ||||
| 16485 | FEDERAL SCREW PRODUCTS INC. | 73734 | 5 | 9 | 1 | ||||
| 16485ADX | AIRDALE EXPRESS LLC | 1VN02 | 5 | 2 | 1 | ||||
| 177004-164 | BOSCH REXROTH GMBH LOHMANN | D9182 | C | 1 | 1 | N | |||
| 177004PC164 | NAVAL SEA SYSTEMS COMMAND | 53711 | C | 1 | 1 | N | |||
| 7628261 | U S ARMY ARMAMENT RESEARCH & | 19200 | 5 | 9 | 1 | ||||
| 91047-244 | EATON AEROSPACE LLC | 16780 | 5 | 2 | 1 | ||||
| AN500D8-7 | AERONAUTICAL STANDARDS GROUP | 88044 | 5 | 9 | 1 | ||||
| AN500D8A7 | AERONAUTICAL STANDARDS GROUP | 88044 | 5 | 2 | 1 | ||||
| F6-8-7L | BAE SYSTEMS INFORMATION AND | 72314 | C | 1 | 1 | F | |||
| F6-8-7LG | BAE SYSTEMS INFORMATION AND | 72314 | C | 1 | 1 | F | |||
| LE500D8-12 | LAWRENCE ENGINEERING AND SUPPLY INC | 04348 | C | 1 | 1 | ||||
| MS35275-244 | MILITARY STANDARDS | 96906 | 5 | 9 | 1 | ||||
| MS35275-244 | NATIONAL AEROSPACE STANDARDS | 80205 | 3 | 2 | 1 | ||||
| MS35275-44 | MILITARY STANDARDS | 96906 | 5 | 9 | 1 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AASK | HEAD STYLE | FILLISTER |
| AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| AASU | HEAD HEIGHT | 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM |
| CYBG | HEAD HOLE CONFIGURATION STYLE | ROUND |
| AASB | FASTENER LENGTH | 0.437 INCHES NOMINAL |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| ASXK | HOLE QUANTITY | 1 |
| AASA | THREAD LENGTH | 0.437 INCHES MINIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AAUB | HOLE DIAMETER | 0.031 INCHES NOMINAL |
| AASL | HEAD DIAMETER | 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
