| MRC |
Requirement Statement |
Characteristics |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END 37.0 DEGREES 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
7000.0 POUNDS PER SQUARE INCH |
| CRXX |
MEASURING METHOD AND LENGTH |
23.000 INCHES NOMINAL WORKING |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND OIL RESISTANT |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CQJX |
NOMINAL THREAD SIZE |
0.562 INCHES 1ST END 0.562 INCHES 2ND END |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
BODY,ALUMINUM,MIL-F-8789 ELBOW,STEEL,MIL-F-8789 NIPPLE,STEEL,MIL-F-8789 SWIVEL NUT,STEEL,MIL-F-8789 |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END THREADED INTERNAL TUBE 2ND END |
| CQBD |
BURST TEST PRESSURE |
14000.0 POUNDS PER SQUARE INCH |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJD |
THREAD CLASS |
3B 1ST END 3B 2ND END |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS28921 GOVERNMENT STANDARD |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END SWIVEL NUT FLARE 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED STEEL WIRE 2ND LAYER BRAIDED STEEL WIRE OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
5.000 INCHES |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS28921G0230 |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| ABKV |
OUTSIDE DIAMETER |
0.766 INCHES NOMINAL |
| CQGM |
MAXIMUM OPERATING PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| AARX |
INSIDE DIAMETER |
0.344 INCHES NOMINAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END ELBOW 2ND END |
| CRLL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
NIPPLE ANODIZED, MIL-A-8625, TYPE 2 OR NIPPLE CADMIUM, QQ-P-416, TYPE 2, CLASS 3 NUT CADMIUM, QQ-P-416, TYPE 2, CLASS 3 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ADLG |
(NON-CORE DATA) FIRST END FITTING SPEC/STD DATA |
MIL MS28760-6 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
NIPPLE,STEEL,MIL-F-8789 SOCKET,ALUMINUM ALLOY,MIL-F-8789 SWIVEL NUT,STEEL,MIL-F-8789 |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT AND 158.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END UNJF 2ND END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| ADLH |
(NON-CORE DATA) SECOND END FITTING SPEC/STD DATA |
MIL MS28781-6 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
NIPPLE CADMIUM, QQ-P-416, TYPE 2, CLASS 3 NUT CADMIUM, QQ-P-416, TYPE 2, CLASS 3 SOCKET ANODIZED, MIL-A-8625, TYPE 2 |
