| MRC |
Requirement Statement |
Characteristics |
| CRXX |
MEASURING METHOD AND LENGTH |
15.750 INCHES NOMINAL WORKING |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS28762 GOVERNMENT STANDARD |
| CRDW |
HYDROSTATIC TEST PRESSURE |
7000.0 POUNDS PER SQUARE INCH |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND OIL RESISTANT |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
NIPPLE STEEL NUT STEEL SOCKET ALUMINUM ALLOY |
| CQJX |
NOMINAL THREAD SIZE |
0.562 INCHES 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| CQRB |
SEAT ANGLE |
12.0 DEGREES 1ST END |
| CQBD |
BURST TEST PRESSURE |
14000.0 POUNDS PER SQUARE INCH |
| MEDA |
MEDIA FOR WHICH DESIGNED |
ALCOHOL, METHYL AND HYDRAULIC FLUID, SILICATE-ESTER BASE SINGLE RESPONSE |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS28762-6-0156 |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
5.000 INCHES |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED STEEL WIRE 2ND LAYER BRAIDED STEEL WIRE 3RD LAYER BRAIDED COTTON CORD OUTER LAYER MOLDED RUBBER |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, FLARELESS 1ST END |
| ABKV |
OUTSIDE DIAMETER |
0.766 INCHES NOMINAL |
| CQGM |
MAXIMUM OPERATING PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3B 1ST END |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADLG |
(NON-CORE DATA) FIRST END FITTING SPEC/STD DATA |
MIL MS28761 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| ADJS |
EXTERIOR COLOR |
BLACK |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
NIPPLE CADMIUM NUT CADMIUM SOCKET ANODIZED |
| AARX |
INSIDE DIAMETER |
0.343 INCHES NOMINAL |
