| MRC |
Requirement Statement |
Characteristics |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |
| CRSM |
VACUUM IN TORR |
50.8 |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
NIPPLE ANODIZED, MIL-A-8625, TYPE 2 SOCKET ANODIZED, MIL-A-8625, TYPE 2 NUT ANODIZED, MIL-A-8625, TYPE 2 NUT ANODIZED, MIL-A-8625, TYPE 2 NUT ANODIZED, MIL-A-8625, TYPE 2 |
| CRDW |
HYDROSTATIC TEST PRESSURE |
1250.0 POUNDS PER SQUARE INCH |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| ABKV |
OUTSIDE DIAMETER |
1.500 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJ 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
600.0 POUNDS PER SQUARE INCH |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS28741 GOVERNMENT STANDARD |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
1.625 INCHES 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED COTTON CORD 2ND LAYER BRAIDED STEEL WIRE OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| AAJD |
THREAD CLASS |
3B 1ST END |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CQBD |
BURST TEST PRESSURE |
2500.0 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| AARX |
INSIDE DIAMETER |
1.125 INCHES NOMINAL |
| ADLG |
(NON-CORE DATA) FIRST END FITTING SPEC/STD DATA |
MS24587 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
NIPPLE ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024, T6 OR NIPPLE ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024, T851 OR NIPPLE ALUMINUM ALLOY, QQ-A-367, COMP 2014, T6 SOCKET ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024, T6 OR SOCKET ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024, T851 OR SOCKET ALUMINUM ALLOY, QQ-A-367, COMP 2014, T6 NUT ALUMINUM ALLOY, QQ-A-225/4, ALLOY 2014, T6 NUT ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024, T6 NUT ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024, T851 |
| CRXX |
MEASURING METHOD AND LENGTH |
11.500 INCHES NOMINAL WORKING |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
9.000 INCHES |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS28741-20-0114 |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
MILDEW RESISTANT AND OIL RESISTANT |
