| MRC |
Requirement Statement |
Characteristics |
| AGVU |
INNER RING WIDTH |
0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES |
| AAZE |
SHANK DIAMETER |
0.3750 INCHES NOMINAL |
| CTLK |
SELF-ALIGNMENT ANGLE |
10.00 DEGREES NOMINAL |
| ABHP |
OVERALL LENGTH |
2.5050 INCHES MINIMUM AND 2.5250 INCHES MAXIMUM |
| ADZG |
LUBRICATION MATERIAL |
GREASE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHAFT |
| STYL |
STYLE DESIGNATOR |
DOUBLE ROW, STAGGERED, BALL |
| ADGA |
OVERALL OUTSIDE DIAMETER |
0.9590 INCHES MINIMUM AND 0.9790 INCHES MAXIMUM |
| AGZA |
ALIGNMENT TYPE |
SELF-ALIGNING |
| MATT |
MATERIAL |
STEEL COMP E52100 BALL STEEL COMP E52100 INNER RING STEEL COMP 4130 OUTER RING PLASTIC POLYTETRAFLUOROETHYLENE SEAL STEEL COMP 4130 SHAFT |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AAZF |
SHANK STYLE |
EXTERNALLY THREADED |
| AAJD |
THREAD CLASS |
3A |
| AGXH |
LENGTH FROM BORE CENTER TO SHANK END |
2.0210 INCHES MINIMUM AND 2.0410 INCHES MAXIMUM |
| ABXV |
BORE DIAMETER |
0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| AGVT |
OUTER RING WIDTH |
0.3920 INCHES MINIMUM AND 0.4070 INCHES MAXIMUM |
| AHAW |
SELF-ALIGNMENT LOCATION |
INTERNAL |
| AGYW |
BEARING SEAL TYPE |
CONTACT |
| FEAT |
SPECIAL FEATURES |
HEAT STABILIZED FOR OPERATION AT 250 DEG FAH |
| AGYJ |
SEAL QUANTITY |
2 |
| LMDC |
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| SFTT |
SURFACE TREATMENT |
CADMIUM OUTER RING CADMIUM SHAFT |
| AGGY |
SHANK THREAD LENGTH |
1.2820 INCHES MINIMUM AND 1.3440 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE SHAFT |
