| MRC |
Requirement Statement |
Characteristics |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
14-37 SINGLE MATING END |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
0.901 INCHES MINIMUM AND 0.911 INCHES MAXIMUM |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MILC81511-1 |
| AAJD |
THREAD CLASS |
2A |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF |
TERMINAL TYPE |
CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-G-45204,TYPE 1,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQW |
MATING END QUANTITY |
1 |
| PRMT |
III PRECIOUS MATERIAL |
GOLD |
| CXCG |
INCLUDED CONTACT QUANTITY |
37 SINGLE MATING END SINGLE CONTACT GROUPING |
| PMWT |
III PRECIOUS MATERIAL AND WEIGHT |
0.037 GOLD GRAINS, TROY |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.894 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| AFQR |
THREADED DEVICE TYPE |
BACK SHELL |
| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
M81511/01ED01P3 |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-C-81511/1 GOVERNMENT SPECIFICATION |
| AFRV |
CONNECTOR LOCKING METHOD |
BAYONET PIN |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AFQZ |
CONTACT REMOVABILITY |
REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
| AFRN |
POLARIZATION METHOD |
KEY, MULTIPLE KEY GROOVE |
| CSWM |
SHELL SURFACE TREATMENT |
CHROMIUM |
| ABKW |
OVERALL HEIGHT |
1.117 INCHES MINIMUM AND 1.133 INCHES MAXIMUM |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.116 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UN |
| CQJX |
NOMINAL THREAD SIZE |
0.875 INCHES |
| AFRP |
INSERT POSITION IN DEG |
270.0 AND 215.0 AND 165.0 AND 108.0 |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.901 INCHES MINIMUM AND 0.911 INCHES MAXIMUM |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| ADZC |
ENVIRONMENTAL PROTECTION |
PRESSURE PROOF AND MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| ABMK |
OVERALL WIDTH |
1.117 INCHES MINIMUM AND 1.133 INCHES MAXIMUM |
| AFRT |
SHELL TYPE |
SOLID |
| ABHP |
OVERALL LENGTH |
1.406 INCHES MINIMUM AND 1.471 INCHES MAXIMUM |
| PMLC |
III PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD |
