| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 884862 | CLARK EQUIPMENT CO | 12603 | 5 | 9 | C | ||||
| 884862 | DANA CORP | 77237 | 3 | 2 | C | ||||
| M600H212 | TELEDYNE CONTINENTAL MOTORS | 14351 | 3 | 9 | C |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| CWWN | END NOMINAL DIAMETER | 1.625 INCHES FIRST END |
| CWRS | BORE NOMINAL DIAMETER | 1.375 INCHES BOTH ENDS |
| AGJS | PITCH DIAMETER | 7.3750 INCHES NOMINAL |
| CWXB | FIRST STEP NOMINAL DIAMETER | 2.375 INCHES FIRST END |
| CWNH | TOOTH FORM | STANDARD |
| CWPZ | HELIX ANGLE | 34.0000 DEGREES |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.812 INCHES BOTH ENDS |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB, RECESSED BODY |
| MATT | MATERIAL | STEEL OVERALL |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| AJLA | TEETH QUANTITY | 60 |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| CWFR | NOMINAL OVERALL LENGTH | 1.219 INCHES |
| CWTX | HUB NOMINAL DIAMETER | 0.406 INCHES SECOND END |
| AAQL | BODY STYLE | WEBBED, OFFSET, SOLID |
| CWSN | KEYWAY NOMINAL WIDTH | 0.250 INCHES BOTH ENDS |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWRM | FACE NOMINAL WIDTH | 1.125 INCHES |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.093 INCHES FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 7.5625 INCHES |
| CWWH | END NOMINAL LENGTH | 0.093 INCHES FIRST END |
