| MRC |
Requirement Statement |
Characteristics |
| AARF |
III MIL-STD-1276 WIRE LEAD TYPE DESIGNATOR |
D |
| CWQF |
QUALITY FACTOR AT REFERENCE TEMP |
500.0000 |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| CRTP |
TOLERANCE RANGE PER SECTION |
-0.25 TO 0.25 PICOFARADS SINGLE SECTION |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
300.0 DC SINGLE SECTION |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
0.200 INCHES NOMINAL |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
M23269/10-3049 |
| AARG |
RELIABILITY INDICATOR |
ESTABLISHED |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.2000 |
| ABMK |
(NON-CORE DATA) OVERALL WIDTH |
0.200 INCHES NOMINAL |
| ABJT |
TERMINAL LENGTH |
1.250 INCHES NOMINAL |
| ADAU |
BODY HEIGHT |
0.115 INCHES NOMINAL |
| ADAT |
BODY WIDTH |
0.200 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 UNINSULATED WIRE LEAD |
| CWJK |
CASE MATERIAL |
PLASTIC |
| PMLC |
III PRECIOUS MATERIAL AND LOCATION |
TERMINAL SURFACE GOLD |
| ABKW |
(NON-CORE DATA) OVERALL HEIGHT |
0.115 INCHES NOMINAL |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| CQBF |
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP |
10000.0 MEGOHMS |
| AEBT |
TERMINAL DIAMETER |
0.020 INCHES NOMINAL |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
24.000 PICOFARADS SINGLE SECTION |
| ADAQ |
BODY LENGTH |
0.300 INCHES NOMINAL |
| ABHP |
(NON-CORE DATA) OVERALL LENGTH |
0.300 INCHES NOMINAL |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| AARH |
RELIABILITY FAILURE RATE LEVEL IN PERCENT |
1.0000 |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-C-23269/10 GOVERNMENT SPECIFICATION |
| PRMT |
(NON-CORE DATA) PRECIOUS MATERIAL |
GOLD |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MILC23269-10 |
| CQLZ |
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS |
140.0 SINGLE SECTION |
| AAQL |
BODY STYLE |
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
100000.0 MEGOHMS |
| CRHD |
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS |
-25.0 TO 25.0 SINGLE SECTION |
