| MRC |
Requirement Statement |
Characteristics |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
M22-05-00022FD |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
25.0 SINGLE SECTION |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-22/5 GOVERNMENT SPECIFICATION |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
295.0 MINIMUM AND 310.0 MAXIMUM |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |
| ABXF |
SHAFT LENGTH |
0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ABPM |
BODY DIAMETER |
2.410 INCHES MAXIMUM |
| AEDX |
SHAFT STYLE |
ROUND, FLATTED |
| AEFK |
MAXIMUM STARTING TORQUE |
40.00 INCH-OUNCES |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AEFP |
NONTURN DEVICE RADIUS |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
2.000 OHMS SINGLE SECTION |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AEEZ |
CONTACT ARM ELECTRICAL OFF POSITION |
FULLY CCW |
| ADAV |
III OVERALL DIAMETER |
3.205 INCHES MAXIMUM |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| AEFM |
MAXIMUM STOP TORQUE |
240.00 INCH-OUNCES |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| ABWV |
SHAFT DIAMETER |
0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
50.0 HEAT SINK SINGLE SECTION |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
340.0 SINGLE SECTION |
| ABNB |
FIRST FLAT LENGTH |
0.344 INCHES NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0 TO 10.0 SINGLE SECTION |
| ABNC |
FLAT HEIGHT |
0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MILR22-5 |
| ABHP |
III OVERALL LENGTH |
2.362 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| ADAQ |
BODY LENGTH |
1.440 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| ADAP |
MOUNTING BUSHING LENGTH |
0.328 INCHES MINIMUM AND 0.422 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AEFN |
NONTURN DEVICE LOCATION |
AT 12 OCLOCK |
| AAPN |
SECTION QUANTITY |
1 |
