| MRC |
Requirement Statement |
Characteristics |
| ABPM |
BODY DIAMETER |
1.000 INCHES MINIMUM AND 1.094 INCHES MAXIMUM |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
290.0 MINIMUM AND 305.0 MAXIMUM |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
25.0 SINGLE SECTION |
| AEFN |
NONTURN DEVICE LOCATION |
AT 6 OCLOCK |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| ABXF |
SHAFT LENGTH |
0.578 INCHES MINIMUM AND 0.672 INCHES MAXIMUM |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ABHP |
III OVERALL LENGTH |
1.735 INCHES MINIMUM AND 2.017 INCHES MAXIMUM |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
15.0 OHMS SINGLE SECTION |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
6.25 FREE AIR SINGLE SECTION |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
340.0 SINGLE SECTION |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
RP071SB150KK |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0 TO 10.0 SINGLE SECTION |
| AEFP |
NONTURN DEVICE RADIUS |
0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| ADAV |
III OVERALL DIAMETER |
1.000 INCHES MINIMUM AND 1.094 INCHES MAXIMUM |
| APXH |
TERMINAL LOCATION |
REAR END |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MILR22-2 |
| ADAQ |
BODY LENGTH |
1.000 INCHES MINIMUM AND 1.126 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| AJYN |
SCREW THREAD DIAMETER |
0.250 INCHES NOMINAL |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AAPN |
SECTION QUANTITY |
1 |
| ABWV |
SHAFT DIAMETER |
0.125 INCHES NOMINAL |
| ADAP |
MOUNTING BUSHING LENGTH |
0.217 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-22/2 GOVERNMENT SPECIFICATION |
