| MRC |
Requirement Statement |
Characteristics |
| CWBH |
SHAFT NOMINAL THREAD SIZE |
0.190 INCHES SINGLE SHAFT |
| AKAF |
SHAFT THREAD DIRECTION |
RIGHT-HAND SINGLE SHAFT |
| ABHP |
OVERALL LENGTH |
2.3560 INCHES NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.0620 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.1872 INCHES NOMINAL SINGLE SHAFT |
| AHCG |
MAXIMUM TEMP RISE |
10.0 DEG CELSIUS |
| AKEJ |
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR |
UNC |
| AKAN |
SHAFT THREAD CLASS |
2A SINGLE SHAFT |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AJSQ |
STATOR INPUT ELECTRICAL POWER RATING |
150.0 WATTS NOMINAL |
| AAVH |
SHOULDER DIAMETER |
1.0000 INCHES MAXIMUM |
| AJWR |
SHOULDER LENGTH |
0.0620 INCHES NOMINAL |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
18.00 |
| ABKK |
FLANGE DIAMETER |
1.0620 INCHES MAXIMUM |
| AJSN |
STATOR INPUT VOLTAGE RATING IN VOLTS |
11.8 NOMINAL |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-7.0 TO 7.0 |
| AJTK |
ZSO IMPEDANCE ANGLE IN DEG |
78.00 MINIMUM AND 84.00 MAXIMUM |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MIL-S-20708/7 |
| AJTJ |
ZSO IMPEDANCE MAGNITUDE IN OHMS |
118.00 MINIMUM AND 150.00 MAXIMUM |
| AJTM |
ZRS IMPEDANCE ANGLE IN DEG |
23.00 MINIMUM AND 35.00 MAXIMUM |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
M20708/7-01D |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
0.07 INCH-OUNCES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 SCREW |
| AJYY |
SHAFT THREAD SERIES DESIGNATOR |
UNF SINGLE SHAFT |
| AAFZ |
BODY MATERIAL |
STEEL, CORROSION RESISTING |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| CRYY |
MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER |
0.112 INCHES |
| AJVM |
SPLINE TOOTH QUANTITY |
21 SINGLE SHAFT |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
15.00 OUTPUT |
| CQTM |
TERMINAL LOCATION |
REAR |
| AAVL |
PILOT DIAMETER |
0.6250 INCHES MAXIMUM |
| AJWQ |
PILOT LENGTH |
0.0620 INCHES NOMINAL |
| AJSS |
FREQUENCY IN HERTZ |
396.0 MINIMUM AND 404.0 MAXIMUM |
| ABKU |
FLANGE THICKNESS |
0.0930 INCHES NOMINAL |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.7320 INCHES MAXIMUM |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
3.000 INPUT TO OUTPUT MINIMUM AND 6.000 INPUT TO OUTPUT MAXIMUM |
| AAQL |
BODY STYLE |
STANDARD ROUND B |
| AHYF |
SECURING HOLE QUANTITY |
4 |
| ABXF |
SHAFT LENGTH |
0.5620 INCHES NOMINAL SINGLE SHAFT |
| AJTL |
ZRS IMPEDANCE MAGNITUDE IN OHMS |
130.00 MINIMUM AND 170.00 MAXIMUM |
| CQWQ |
SHAFT THREAD LENGTH |
0.1970 INCHES NOMINAL SINGLE SHAFT |
| CRSJ |
SHAFT TYPE |
SPLINE W/THREADS SINGLE SHAFT |
| AJXA |
SPLINE TOOTH DIAMETRAL PITCH |
120 SINGLE SHAFT |
| AJSP |
STATOR INPUT CURRENT RATING |
86.0 MILLIAMPERES MAXIMUM |
