| MRC |
Requirement Statement |
Characteristics |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AJLA |
TEETH QUANTITY |
32 |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWFR |
NOMINAL OVERALL LENGTH |
0.312 INCHES |
| CWRS |
BORE NOMINAL DIAMETER |
0.188 INCHES BOTH ENDS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CWNH |
TOOTH FORM |
STANDARD |
| CWTX |
HUB NOMINAL DIAMETER |
0.310 INCHES FIRST END |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.529 INCHES |
| CWRM |
FACE NOMINAL WIDTH |
0.125 INCHES |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.187 INCHES FIRST END |
| SR-5 |
MANUFACTURERS CODE |
10001 |
| SR-5 |
DESIGN CONTROL REFERENCE |
2224025-32 |
| AGJS |
PITCH DIAMETER |
0.4993 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 OVERALL |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
40 TRANSVERSELY THROUGH HUB, FIRST END |
