| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 07-382-14A022 | RBC TRANSPORT DYNAMICS CORP. | 09455 | 5 | 2 | 5 | ||||
| 103-0114-022 | REXNORD INDUSTRIES LLC | 77896 | 5 | 9 | 5 | ||||
| 123-0214A022 | REXNORD INDUSTRIES LLC | 77896 | 5 | 9 | 5 | ||||
| ADLF14A022 | NEW HAMPSHIRE BALL BEARINGS INC. | 15860 | 5 | 2 | 5 | ||||
| AHJF14A022 | NEW HAMPSHIRE BALL BEARINGS INC. | 50294 | 5 | 2 | 5 | ||||
| AS81934/2 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | 81343 | 3 | 1 | 5 | ||||
| FBJW28TF-14A022 | RBC AIRCRAFT PRODUCTS INC. | 3NPS1 | 5 | 2 | 5 | ||||
| FBJW28TF14A022 | TIMKEN AEROSPACE INC | 21335 | 5 | 9 | 5 | ||||
| KDJ14A022-241 | DOVER DIVERSIFIED DE INC. | 97613 | 5 | 9 | 5 | ||||
| KDJ14A022-342 | DOVER DIVERSIFIED DE INC. | 97613 | 5 | 2 | 5 | ||||
| KRJ14HDYB-14A022M | KAMATICS CORPORATION | 50632 | 5 | 2 | 5 | ||||
| M81934/2-14A022 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | 81343 | 3 | 2 | 5 | ||||
| M81934/2-14A022 | MILITARY SPECIFICATIONS | 81349 | 5 | 9 | 5 | ||||
| MIL-B-81934/2 | MILITARY SPECIFICATIONS | 81349 | 5 | 9 | 5 | ||||
| MS21241-14A022 | MILITARY STANDARDS | 96906 | 5 | 9 | 5 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER ALUMINUM ALLOY 2024 OUTER LAYER |
| ADAR | BODY OUTSIDE DIAMETER | 1.0640 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| ADAS | BODY INSIDE DIAMETER | 0.8755 INCHES MINIMUM AND 0.8765 INCHES MAXIMUM |
| ABPC | (NON-CORE DATA) UNDERCUT WIDTH | 0.0620 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 0.7350 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AGFF | FLANGE WIDTH | 0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM |
| AEPR | FLANGE OUTSIDE DIAMETER | 1.6050 INCHES MINIMUM AND 1.6250 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/3,T8511 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6,T851 FED SPEC SINGLE MATERIAL RESPONSE OUTER LAYER |
| STYL | STYLE DESIGNATOR | SOLID |
| BZLX | CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER SQUARE INSIDE RIGHT CORNER SQUARE INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER |
| CSFM | (NON-CORE DATA) UNDERCUT DEPTH | 0.0050 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | PLASTIC LINER BONDED TO LEFT END SURFACE OF FLANGE |
