| MRC |
Requirement Statement |
Characteristics |
| MATT |
MATERIAL |
PLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER ALUMINUM ALLOY 2024 OUTER LAYER |
| CSYM |
SURFACE FINISH |
125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY 125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY 125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE 125.0 MICROINCHES RIGHT END SURFACE OF BODY 125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE |
| ADAR |
BODY OUTSIDE DIAMETER |
1.0640 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| ADAS |
BODY INSIDE DIAMETER |
0.8755 INCHES MINIMUM AND 0.8765 INCHES MAXIMUM |
| ABPC |
(NON-CORE DATA) UNDERCUT WIDTH |
0.0620 INCHES MAXIMUM |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| ABHP |
OVERALL LENGTH |
0.4850 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
M81934/2-14A014 |
| AGFF |
FLANGE WIDTH |
0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM |
| AEPR |
FLANGE OUTSIDE DIAMETER |
1.6050 INCHES MINIMUM AND 1.6250 INCHES MAXIMUM |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/3,T8511 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6,T851 FED SPEC SINGLE MATERIAL RESPONSE OUTER LAYER |
| SFTT |
SURFACE TREATMENT |
ANODIZE OR CHROMATE OUTER LAYER |
| STYL |
STYLE DESIGNATOR |
SOLID |
| BZLX |
CORNER SHAPE |
SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER SQUARE INSIDE RIGHT CORNER SQUARE INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER |
| CSFM |
(NON-CORE DATA) UNDERCUT DEPTH |
0.0050 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OUTER LAYER |
| FEAT |
SPECIAL FEATURES |
PLASTIC,POLYTETRAFLUOROETHYLENE LINER BONDED TO LEFT END SURFACE OF FLANGE |
