| MRC |
Requirement Statement |
Characteristics |
| ADST |
BONNET ATTACHMENT METHOD |
BOLTED |
| SUPP |
III SUPPLEMENTARY FEATURES |
THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCES 13902 HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| AAAR |
NOMINAL PIPE SIZE ACCOMMODATED |
0.560 INCHES 1ST END |
| AQLR |
VALVE OPERATION METHOD |
AIR |
| MATT |
MATERIAL |
STEEL BODY STEEL FLOW CONTROL DEVICE |
| MEDA |
MEDIA FOR WHICH DESIGNED |
STEAM SINGLE RESPONSE |
| STYL |
STYLE DESIGNATOR |
A1 STRAIGHT THRU |
| CQGM |
MAXIMUM OPERATING PRESSURE |
600.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| ADQU |
FLOW CONTROL DEVICE |
DISK OR STEM |
| AWLS |
CONNECTION TYPE |
UNTHREADED INTERNAL PIPE 1ST END |
| SPCL |
SPECIAL TEST FEATURES |
HYDROSTATIC TESTS AT 2175 PSI DORSTRENGTH AND POROSITY WITH DISC OPEN,HYDROSTATIC TEST AT 1330 PSI FOR TIGHTNESS OF SEAT ON BOTH SIDES,AIR TEST AT 100 PSI FOR TIGHTNESS ON SEAT |
| AHNC |
CONNECTION STYLE |
SOCKET 1ST END |
| CCFG |
VALVE SIZE |
0.250 INCHES |
| ADSR |
BONNET TYPE |
OUTSIDE SCREW-YOKE |
