| MRC |
Requirement Statement |
Characteristics |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
7000.0 POUNDS PER SQUARE INCH |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
12.000 INCHES |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM OR COMPLETE FITTING ZINC |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END |
| CQBD |
BURST TEST PRESSURE |
16000.0 POUNDS PER SQUARE INCH |
| CQGM |
MAXIMUM OPERATING PRESSURE |
3800.0 POUNDS PER SQUARE INCH |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| FEAT |
SPECIAL FEATURES |
ALUMINUM IDENTIFICATION SLEEVE ON HOSE,MIL-L-52325,PARAGRAPH 3.9.1 |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED STEEL WIRE 2ND LAYER BRAIDED STEEL WIRE 3RD LAYER BRAIDED STEEL WIRE 4TH LAYER BRAIDED STEEL WIRE OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQJX |
NOMINAL THREAD SIZE |
1.312 INCHES 1ST END |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| AAJD |
THREAD CLASS |
2B 1ST END |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| THSD |
THREAD SERIES DESIGNATOR |
UN 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| AARX |
INSIDE DIAMETER |
1.000 INCHES NOMINAL |
| CRXX |
MEASURING METHOD AND LENGTH |
43.000 INCHES NOMINAL OVERALL |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| ABKV |
OUTSIDE DIAMETER |
1.547 INCHES NOMINAL |
