| MRC |
Requirement Statement |
Characteristics |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AARX |
INSIDE DIAMETER |
0.313 INCHES MINIMUM AND 0.344 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END NPTF 2ND END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END THREADED EXTERNAL PIPE 2ND END |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED FIBER 2ND LAYER BRAIDED WIRE OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END INVERTED FLARE 2ND END |
| CBBL |
FEATURES PROVIDED |
REUSABLE END FITTINGS |
| CRLL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 2 |
| CQBD |
BURST TEST PRESSURE |
4000.0 POUNDS PER SQUARE INCH |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
2.700 INCHES |
| CRXX |
MEASURING METHOD AND LENGTH |
41.500 INCHES NOMINAL OVERALL |
| CQJX |
NOMINAL THREAD SIZE |
0.562 INCHES 1ST END 0.250 INCHES 2ND END |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| ABKV |
OUTSIDE DIAMETER |
0.597 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3B 1ST END |
| ABJH |
TEMP RATING |
-55.0 DEG FAHRENHEIT AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
INCLUDED |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END STRAIGHT 2ND END |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 2 |
| CRDW |
HYDROSTATIC TEST PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1000.0 POUNDS PER SQUARE INCH |
| TEST |
TEST DATA DOCUMENT |
19207-10932997 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END 30.0 DEGREES 2ND END |
| ADJS |
EXTERIOR COLOR |
BLACK |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
OIL RESISTANT AND HEAT RESISTANT AND FUEL RESISTANT |
