| MRC |
Requirement Statement |
Characteristics |
| AAQG |
AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER |
NOT RATED |
| AARG |
RELIABILITY INDICATOR |
ESTABLISHED |
| AAQZ |
INCLOSURE METHOD |
ENCAPSULATED |
| SPCL |
SPECIAL TEST FEATURES |
STEADY STATE COND 6.4 AMP AT 100 MV; GLOW COND ONE 19.2 AMP AT 5.8 W AT 200 MILLISECONDS MAX; LOW COND TWO 64.0 AMP AT 64.0 W AT 50 MILLISECONDS MAX |
| AARH |
RELIABILITY FAILURE RATE LEVEL IN PERCENT |
0.010 |
| AAQH |
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS |
-55.0 TO 125.0 |
| AAQF |
AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER |
125.0 |
| ADAQ |
BODY LENGTH |
0.475 INCHES MAXIMUM |
| AARB |
TERMINAL TYPE |
WIRE LEAD |
| STYL |
STYLE DESIGNATOR |
AXIAL TERMINAL EACH END |
| FEAT |
SPECIAL FEATURES |
TWO NO. 24 AWG TERMINALS AND TWO NO. 20 AWG TERMINALS |
| AEFB |
POWER DISSIPATION RATING IN WATTS |
0.639 FREE AIR |
| ABJT |
TERMINAL LENGTH |
1.250 INCHES MINIMUM |
| AAPP |
ELECTRICAL RESISTANCE |
0.0156 OHMS |
| TEST |
TEST DATA DOCUMENT |
09966-R235A062 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AAPQ |
RESISTANCE TOLERANCE IN PERCENT |
-2.000 TO 2.000 |
| AAPE |
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS |
-50.0 TO 50.0 |
| ABPM |
BODY DIAMETER |
0.200 INCHES MAXIMUM |
