| MRC |
Requirement Statement |
Characteristics |
| ADER |
MOUNTING STYLE |
BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| AFYS |
KEYWAY LENGTH |
0.625 INCHES NOMINAL |
| BCGM |
RECTIFIER LOCATION |
SEPARATE |
| BCLY |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER |
3.062 INCHES NOMINAL |
| ELEC |
VOLTAGE IN VOLTS |
6.0 |
| BCMH |
BOTTOM MOUNTING HOLE DIAMETER |
0.320 INCHES NOMINAL |
| ANTX |
DISTANCE FROM END TO KEYWAY CENTER |
0.907 INCHES NOMINAL |
| ACJC |
MOUNTING HOLE THREAD DIRECTION |
RIGHT-HAND |
| ADZC |
ENVIRONMENTAL PROTECTION |
DUSTPROOF |
| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
125.0 |
| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
193.0 |
| ABPT |
SECOND STEP DIAMETER |
0.668 INCHES MINIMUM AND 0.669 INCHES MAXIMUM |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC |
| ABFF |
FURNISHED ITEMS |
LOCKWASHER AND NUT AND WOODRUFF KEY |
| BCGG |
MINIMUM CURRENT CUT-IN SPEED IN RPM |
ANY ACCEPTABLE |
| BCGD |
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT |
ANY ACCEPTABLE |
| BCND |
MAXIMUM RATED ARMATURE SPEED IN RPM |
1800 |
| BCGS |
SHAFT DRIVE END STYLE |
STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| AKAE |
MAXIMUM OPERATING ALTITUDE RATING |
NOT RATED |
| BZRR |
THREAD SERIES |
UNS |
| BCGF |
MAXIMUM OUTPUT CURRENT RATING IN AMPS |
13.0 |
| BCLZ |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER |
2.937 INCHES NOMINAL |
| BCMF |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET |
6.868 INCHES MINIMUM AND 6.886 INCHES MAXIMUM |
| CMLN |
MOUNTING HOLE THREAD CLASS |
2B |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
18 |
| BCGN |
GROUNDING METHOD |
EXTERNAL |
| AHZV |
SUBMERSIBILITY |
NONSUBMERSIBLE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLL |
MOUNTING HOLE THREAD DIAMETER |
0.312 INCHES NOMINAL |
| AASA |
THREAD LENGTH |
0.500 INCHES NOMINAL |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE |
| BCMD |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET |
6.118 INCHES MINIMUM AND 6.136 INCHES MAXIMUM |
| AXHX |
GROUND POLARITY TYPE |
NEGATIVE |
| ABRR |
KEYWAY WIDTH |
0.125 INCHES NOMINAL |
| CFHL |
THREAD CLASS |
2A |
| ABVA |
UNTHREADED PORTION LENGTH |
0.750 INCHES NOMINAL |
| AWDP |
THREAD DIAMETER |
0.632 INCHES MINIMUM AND 0.636 INCHES MAXIMUM |
