| MRC |
Requirement Statement |
Characteristics |
| CQLH |
III DC LEAKAGE AT MAXIMUM OPERATING TEMP |
7.5 MILLIAMPERES |
| ADAQ |
BODY LENGTH |
0.296 INCHES MAXIMUM |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
4.700 MICROFARADS SINGLE SECTION |
| AECE |
III ANODE TYPE |
SOLID |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AAQL |
BODY STYLE |
W/O MTG FACILITIES, AXIAL TERMINALS |
| SR-1 |
MANUFACTURERS CODE |
94756 |
| CWNJ |
CAPACITIVE ELECTRODE MATERIAL |
TANTALUM |
| CWJK |
CASE MATERIAL |
METAL |
| CRTP |
TOLERANCE RANGE PER SECTION |
-10.00 TO 10.00 PERCENT SINGLE SECTION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| TEST |
TEST DATA DOCUMENT |
94756-441-1017 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 UNINSULATED WIRE LEAD |
| AECQ |
ELECTRICAL POLARIZATION |
POLARIZED |
| ABJT |
TERMINAL LENGTH |
1.250 INCHES MINIMUM |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
10.0 DC SINGLE SECTION |
| CBBL |
FEATURES PROVIDED |
HERMETICALLY SEALED CASE |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| SR-1 |
MFR SOURCE CONTROLLING REFERENCE |
441-1017-155 |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| ABPM |
BODY DIAMETER |
0.135 INCHES MAXIMUM |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
6.0000 |
| CWSG |
III TERMINAL SURFACE TREATMENT |
SOLDER |
| CWQH |
DC LEAKAGE AT REFERENCE TEMP |
0.600 MICROAMPERES |
| AECN |
III IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS |
3.0 |
| CWSZ |
CASE INSULATION MATERIAL |
PLASTIC |
