| MRC |
Requirement Statement |
Characteristics |
| AAHH |
FIRST END GROOVE DIAMETER |
4.9650 INCHES MINIMUM AND 5.0000 INCHES MAXIMUM |
| AMCY |
FIRST END DISTANCE FROM END TO GROOVE |
11.6000 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
14.568 INCHES NOMINAL |
| AMDM |
FIRST END SPLINE LENGTH |
6.000 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 4340 |
| CSPY |
LARGEST STEP DIAMETER |
6.300 INCHES NOMINAL |
| ATPC |
STEP QUANTITY |
4 |
| AMDL |
FIRST END DIAMETER |
4.9650 INCHES MINIMUM AND 5.0000 INCHES MAXIMUM |
| AGAV |
III END ITEM IDENTIFICATION |
2350-01-087-1095 TANK,ARMORED,BATTLE,CMBT85XM1 |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AAGZ |
FIRST END STYLE |
CIRCULAR GROOVED AND SPLINED (STRAIGHT) |
| TEST |
TEST DATA DOCUMENT |
19207-12268045 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| FEAT |
SPECIAL FEATURES |
HARDNESS ROCKWELL C42-49 EXCEPT AS SHOWN ON DRAWING. TO BE CLEAN AND FREE FROM BURRS |
| BDSQ |
FIRST END SPLINE QUANTITY |
39 |
| AMDN |
FIRST END SPLINE MINOR DIAMETER |
4.6080 INCHES NOMINAL |
| AAHG |
FIRST END GROOVE WIDTH |
0.5000 INCHES NOMINAL |
| AMDP |
FIRST END SPLINE MAJOR DIAMETER |
4.9650 INCHES MINIMUM AND 5.0000 INCHES MAXIMUM |
