| MRC |
Requirement Statement |
Characteristics |
| CWJK |
CASE MATERIAL |
GLASS |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-C-11272/4B GOVERNMENT SPECIFICATION |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
5600.000 PICOFARADS SINGLE SECTION |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
CY30C562J |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| ADAU |
BODY HEIGHT |
0.750 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MILC11272-4 |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 UNINSULATED WIRE LEAD |
| AAQL |
BODY STYLE |
W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES |
| CRTP |
TOLERANCE RANGE PER SECTION |
-5.00 TO 5.00 PERCENT SINGLE SECTION |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| CQBF |
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP |
10000.0 MEGOHMS |
| ABJT |
TERMINAL LENGTH |
1.125 INCHES MINIMUM |
| ADAQ |
BODY LENGTH |
0.766 INCHES NOMINAL |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
500.0 DC SINGLE SECTION |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| AEBT |
TERMINAL DIAMETER |
0.025 INCHES NOMINAL |
| CWSG |
III TERMINAL SURFACE TREATMENT |
SOLDER |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.0025 |
| CQLZ |
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS |
140.0 SINGLE SECTION |
| ADAT |
BODY WIDTH |
0.141 INCHES NOMINAL |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
100000.0 MEGOHMS |
| CRHD |
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS |
-25.0 TO 25.0 SINGLE SECTION |
