| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 63977PC1 | NAVAIR AND NAVSEA MANAGED | 10001 | 3 | 2 | 2 | ||||
| BUWEPSDWGSP9028 | NAVAL RESERVE CENTER | 16624 | 3 | 2 | 2 | ||||
| TP9028 | NAVAIR AND NAVSEA MANAGED | 10001 | 5 | 2 | 2 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| CWFR | NOMINAL OVERALL LENGTH | 0.722 INCHES |
| AGJS | PITCH DIAMETER | 1.5000 INCHES NOMINAL |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.350 INCHES SECOND END |
| AAQL | BODY STYLE | PLAIN, SOLID |
| CWQD | PITCH ANGLE | 45.0000 DEGREES |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.5675 INCHES |
| CWPP | PRESSURE ANGLE | 14.4999 DEGREES |
| AJLA | TEETH QUANTITY | 30 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| FEAT | SPECIAL FEATURES | UNTHREADED HOLE LOCATED 90 DEG FROM KEY |
| MATT | MATERIAL | NICKEL ALLOY OVERALL |
| CWRS | BORE NOMINAL DIAMETER | 0.500 INCHES BOTH ENDS |
| STYL | STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDING |
| CWTX | HUB NOMINAL DIAMETER | 0.900 INCHES SECOND END |
| CWRM | FACE NOMINAL WIDTH | 0.350 INCHES |
| CWMW | TEETH TYPE | STRAIGHT |
| CWTR | HUB STYLE DESIGNATOR | PINNED SECOND END |
