| MRC |
Requirement Statement |
Characteristics |
| BNYX |
FIRST END SPLINE TYPE |
INVOLUTE |
| BNPJ |
FIRST END FACILITY DIAMETER |
2.115 INCHES MINIMUM AND 2.120 INCHES MAXIMUM |
| BBCD |
FIRST END SPLINE QUANTITY |
35 |
| AMQF |
SECOND END TYPE |
SPLINED |
| BNTT |
SECOND END BEARING SEAT |
NOT INCLUDED |
| BNTN |
SECOND END SPLINE PRESSURE ANGLE IN DEG |
30.0 |
| AMGF |
SECOND END PITCH DIAMETER |
2.1875 INCHES NOMINAL |
| BNTS |
SECOND END FACILITY LOCATION |
LOCATED AT SHAFT END |
| AMDM |
FIRST END SPLINE LENGTH |
2.438 INCHES NOMINAL |
| BNTD |
FIRST END FACILITY LOCATION |
LOCATED AT SHAFT END |
| BNTM |
SECOND END SPLINE TYPE |
INVOLUTE |
| BNTC |
FIRST END FACILITY WIDTH |
0.500 INCHES NOMINAL |
| BNPK |
SECOND END FACILITY DIAMETER |
2.115 INCHES MINIMUM AND 2.120 INCHES MAXIMUM |
| BNTF |
FIRST END BEARING SEAT |
NOT INCLUDED |
| BBCF |
SECOND END SPLINE QUANTITY |
35 |
| BNYY |
FIRST END SPLINE PRESSURE ANGLE IN DEG |
30.0 |
| ABHP |
OVERALL LENGTH |
41.906 INCHES NOMINAL |
| BNTB |
FIRST END ENGAGING/LOCKING/POSITIONING FACILITY |
GUIDE END |
| AETC |
METALLIC HARDNESS RATING |
40.0 MINIMUM ROCKWELL C AND 47.0 MAXIMUM ROCKWELL C |
| AMGA |
SECOND END SPLINE LENGTH |
1.875 INCHES NOMINAL |
| AMQA |
FIRST END TYPE |
SPLINED |
| MATL |
MATERIAL |
STEEL |
| BNTR |
SECOND END FACILITY WIDTH |
0.250 INCHES NOMINAL |
| AMDS |
FIRST END PITCH DIAMETER |
2.1875 INCHES NOMINAL |
| BNTQ |
SECOND END ENGAGING/LOCKING/POSITIONING FACILITY |
GUIDE END |
