| MRC |
Requirement Statement |
Characteristics |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
NUT CADMIUM, QQ-P-416, TYPE 2, CLASS 3 SLEEVE CADMIUM, QQ-P-416, TYPE 2, CLASS 3 |
| CQBD |
BURST TEST PRESSURE |
300.0 POUNDS PER SQUARE INCH |
| AARX |
INSIDE DIAMETER |
0.985 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
23.410 INCHES MINIMUM OVERALL AND 23.590 INCHES MAXIMUM OVERALL |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT WITH COMPRESSION SLEEVE 1ST END |
| ADJL |
INNER CONVEYING TUBE STYLE |
ANNULAR CLOSE-PITCH CORRUGATED |
| ABKV |
OUTSIDE DIAMETER |
1.390 INCHES MINIMUM AND 1.410 INCHES MAXIMUM |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED BRONZE WIRE |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
NUT STEEL, CORROSION RESISTING SLEEVE STEEL, CORROSION RESISTING |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND ETHYLENE GLYCOL RESISTANT |
| CQRB |
SEAT ANGLE |
45.0 DEGREES 1ST END |
| AAJP |
(NON-CORE DATA) OUTSIDE SURFACE TREATMENT |
PHOSPHATE |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CBBL |
FEATURES PROVIDED |
IDENTICAL ENDS |
| CQJX |
NOMINAL THREAD SIZE |
1.312 INCHES 1ST END |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| AAJD |
THREAD CLASS |
2B 1ST END |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
STEEL, CORROSION RESISTING |
| THSD |
THREAD SERIES DESIGNATOR |
UN 1ST END |
| ABJH |
TEMP RATING |
300.0 DEG FAHRENHEIT SINGLE RESPONSE |
