| MRC |
Requirement Statement |
Characteristics |
| CQJX |
NOMINAL THREAD SIZE |
1.562 INCHES |
| ABHP |
OVERALL LENGTH |
2.625 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
2A |
| PMLC |
III PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES RHODIUM AND CONTACT SURFACES SILVER |
| ADZC |
ENVIRONMENTAL PROTECTION |
THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT AND MOISTURE RESISTANT |
| CSCF |
TERMINAL TYPE |
CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.375 INCHES NOMINAL |
| CSPT |
SHELL MATERIAL |
STEEL |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-STD-171,FINISH NO. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF |
| AFQW |
MATING END QUANTITY |
1 |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
16-61 SINGLE MATING END |
| ABKW |
OVERALL HEIGHT |
1.703 INCHES NOMINAL |
| AFRW |
CONNECTOR CABLE STRAIN RELIEF METHOD |
CABLE CLAMP |
| AFQR |
THREADED DEVICE TYPE |
COUPLING FACILITY |
| PRMT |
III PRECIOUS MATERIAL |
RHODIUM AND SILVER |
| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING STRAIN RELIEF |
| ABMK |
OVERALL WIDTH |
1.703 INCHES NOMINAL |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
1.375 INCHES NOMINAL |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-26636 MIL SPEC ALL TREATMENT RESPONSES SINGLE MATING END SINGLE CONTACT GROUPING |
| CQYH |
CONTACT SURFACE TREATMENT |
RHODIUM AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AFQZ |
CONTACT REMOVABILITY |
REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRV |
CONNECTOR LOCKING METHOD |
EXTERNALLY THREADED SHELL |
| CTHH |
SHELL MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763,SERIES 300 FED SPEC SINGLE MATERIAL RESPONSE |
| CQZG |
INSERT MATERIAL |
RUBBER SYNTHETIC SINGLE MATING END |
| CQTZ |
CONTACT MATERIAL |
NICKEL AND COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CTKL |
INSERT MATERIAL DOCUMENT AND CLASSIFICATION |
ZZ-R-765 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| CSWM |
SHELL SURFACE TREATMENT |
PASSIVATE |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.708 INCHES MINIMUM AND 0.728 INCHES MAXIMUM |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| PMWT |
III PRECIOUS MATERIAL AND WEIGHT |
0.061 RHODIUM GRAINS, TROY AND 0.061 SILVER GRAINS, TROY |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCG |
INCLUDED CONTACT QUANTITY |
61 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRT |
SHELL TYPE |
SOLID |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.145 INCHES NOMINAL |
| AFRN |
POLARIZATION METHOD |
KEYWAY OR MULTIPLE KEYWAY |
| AFRP |
INSERT POSITION IN DEG |
276.0 AND 208.0 AND 156.0 AND 26.0 |
| AFQJ |
CABLE ENTRANCE DIAMETER |
1.162 INCHES NOMINAL |
