| MRC |
Requirement Statement |
Characteristics |
| SR-1 |
MFR SOURCE CONTROLLING REFERENCE |
A15PS101-21 |
| CQRB |
SEAT ANGLE |
33.0 DEGREES 1ST END 33.0 DEGREES 2ND END |
| CRXX |
MEASURING METHOD AND LENGTH |
10.130 INCHES NOMINAL WORKING |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| CQJX |
NOMINAL THREAD SIZE |
0.562 INCHES 1ST END 0.562 INCHES 2ND END |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| ADJL |
INNER CONVEYING TUBE STYLE |
ANNULAR CLOSE-PITCH CORRUGATED |
| ADJS |
EXTERIOR COLOR |
NATURAL |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END 3B 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
1500.0 POUNDS PER SQUARE INCH |
| ABKV |
OUTSIDE DIAMETER |
0.680 INCHES NOMINAL |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END SWIVEL NUT FLARE 2ND END |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| ZZZK |
SPECIFICATION/STANDARD DATA |
77272-A15PS101-21 MANUFACTURERS SOURCE CONTROL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END ELBOW 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| SR-1 |
MANUFACTURERS CODE |
77272 |
| CQGM |
MAXIMUM OPERATING PRESSURE |
60.0 POUNDS PER SQUARE INCH |
| ABJH |
TEMP RATING |
1000.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END UNJF 2ND END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
STEEL, SAE 30321 |
| CRLL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| AARX |
INSIDE DIAMETER |
0.420 INCHES NOMINAL |
