| MRC |
Requirement Statement |
Characteristics |
| CRDN |
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS |
-200.0 TO 200.0 SINGLE SECTION |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.0040 |
| SR-1 |
MANUFACTURERS CODE |
94580 |
| ADAT |
BODY WIDTH |
0.360 INCHES MAXIMUM |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
0.194 INCHES MINIMUM AND 0.256 INCHES MAXIMUM |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABJT |
TERMINAL LENGTH |
1.000 INCHES MINIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 UNINSULATED WIRE LEAD |
| CWJK |
CASE MATERIAL |
PLASTIC |
| CRTP |
TOLERANCE RANGE PER SECTION |
-5.00 TO 5.00 PERCENT SINGLE SECTION |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
500.0 DC SINGLE SECTION |
| SR-1 |
MFR SOURCE CONTROLLING REFERENCE |
959514-7 |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
50000.0 MEGOHMS |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| ADAU |
BODY HEIGHT |
0.130 INCHES NOMINAL |
| CWSG |
III TERMINAL SURFACE TREATMENT |
SOLDER |
| ADAQ |
BODY LENGTH |
0.425 INCHES NOMINAL |
| TEST |
TEST DATA DOCUMENT |
94580-959514 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AAQL |
BODY STYLE |
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
15.000 PICOFARADS SINGLE SECTION |
