| MRC |
Requirement Statement |
Characteristics |
| ADLK |
FIRST LEG LENGTH |
1.750 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.190 INCHES NOMINAL |
| AHLH |
SECOND LEG END WIDTH |
7.620 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| ADLL |
SECOND LEG LENGTH |
2.620 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8,TEMPER H32 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.404 INCHES MINIMUM AND 0.411 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
1.610 INCHES MINIMUM AND 1.630 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.310 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PAINT |
| AHQN |
FIRST LEG WIDTH |
9.120 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
6.500 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.750 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.190 INCHES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
6.120 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
4.000 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.310 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
2.430 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
135.0 DEGREES NOMINAL |
| FEAT |
SPECIAL FEATURES |
COLOR OLIVE DRAB,NO. 34087,MIL STD 595 |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| AHLF |
SECOND LEG WIDTH |
9.120 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-F-14072,FINISH 513.1F MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
