| MRC |
Requirement Statement |
Characteristics |
| BZRR |
THREAD SERIES |
UNF |
| AXFH |
SPLINE LENGTH |
2.000 INCHES NOMINAL |
| ADER |
MOUNTING STYLE |
BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| ELEC |
VOLTAGE IN VOLTS |
24.0 |
| BCGS |
SHAFT DRIVE END STYLE |
SPLINED SHAFT END, THREADED |
| BCMH |
BOTTOM MOUNTING HOLE DIAMETER |
0.453 INCHES NOMINAL |
| AAUJ |
SPLINE MAJOR DIAMETER |
0.874 INCHES NOMINAL |
| AXHX |
GROUND POLARITY TYPE |
NEGATIVE OR POSITIVE |
| AAUH |
SPLINE MINOR DIAMETER |
0.763 INCHES NOMINAL |
| BCMD |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET |
7.243 INCHES MINIMUM AND 7.257 INCHES MAXIMUM |
| ACJC |
MOUNTING HOLE THREAD DIRECTION |
RIGHT-HAND |
| BCGF |
MAXIMUM OUTPUT CURRENT RATING IN AMPS |
40.0 |
| BCMF |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET |
8.123 INCHES MINIMUM AND 8.137 INCHES MAXIMUM |
| BCMB |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG |
180.0 |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC |
| BCMC |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG |
159.0 |
| CMLN |
MOUNTING HOLE THREAD CLASS |
2B |
| ADZC |
ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT AND FUNGUS RESISTANT |
| AAUK |
SPLINE WIDTH |
0.196 INCHES NOMINAL |
| AHZV |
SUBMERSIBILITY |
NONSUBMERSIBLE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLL |
MOUNTING HOLE THREAD DIAMETER |
0.375 INCHES NOMINAL |
| BCLY |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER |
5.875 INCHES NOMINAL |
| ABSA |
SPLINE QUANTITY |
13 |
| BCGN |
GROUNDING METHOD |
INTERNAL |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE |
| ABFF |
FURNISHED ITEMS |
TERMINAL SHIELD |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| BCLZ |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER |
5.880 INCHES NOMINAL |
| ZZZV |
III FSC APPLICATION DATA |
ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
| AASA |
THREAD LENGTH |
0.781 INCHES NOMINAL |
| AWDP |
THREAD DIAMETER |
0.625 INCHES NOMINAL |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
16 |
| CFHL |
THREAD CLASS |
2A |
