| MRC |
Requirement Statement |
Characteristics |
| ADAR |
BODY OUTSIDE DIAMETER |
0.8135 INCHES MINIMUM AND 0.8145 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM INSIDE DIAMETER SURFACE OF BODY CADMIUM OUTSIDE DIAMETER SURFACE OF BODY CADMIUM OUTSIDE DIAMETER SURFACE OF FLANGE CADMIUM RIGHT END SURFACE OF BODY CADMIUM RIGHT END SURFACE OF LEFT FLANGE |
| SR-5 |
DESIGN CONTROL REFERENCE |
9147-39 |
| MATT |
MATERIAL |
STEEL COMP 4130 OVERALL |
| BZLX |
CORNER SHAPE |
SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER SQUARE INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER ROUND LEFT FLANGE BODY CORNER |
| AAZP |
(NON-CORE DATA) CHAMFER LENGTH |
0.0950 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
10.0 ROCKWELL C MINIMUM AND 25.0 ROCKWELL C MAXIMUM OVERALL |
| ABHP |
OVERALL LENGTH |
0.8800 INCHES NOMINAL |
| SR-5 |
THE MANUFACTURERS DATA |
|
| CSYM |
SURFACE FINISH |
40.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE |
| ADAS |
BODY INSIDE DIAMETER |
0.6800 INCHES MINIMUM AND 0.6820 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE INSIDE DIAMETER SURFACE OF BODY QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF BODY QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF LEFT FLANGE |
| ABGG |
(NON-CORE DATA) RADIUS |
0.0700 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
SOLID |
| AGFF |
FLANGE WIDTH |
0.0610 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM |
| AEPR |
FLANGE OUTSIDE DIAMETER |
1.1900 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SR-5 |
MANUFACTURERS CODE |
13002 |
| CSYT |
(NON-CORE DATA) CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
